•Temperature of hot water outflow depends on the water temperature from inlet as well as the volume of water flow.It varies in different regions. The water temperature you get is not necessarily within the water temperature range in the description.
•If it’s cold in your area and you have high water temperature requirements, please DO NOT BUY THIS WATER HEATER!
•The water heater must be installed vertically!
•Before using the machine, first turn the water on and then power on. Avoid damage.
•The water heater needs to reach the required water pressure to start.
•Be sure to check out the instructional video before using! If you don’t understand, contact customer service! Do not modify the water heater without permission!
•There is a certain difference between the display temperature and the actual water temperature.
Warning!!!
1. When you receive the water heater, please do not test it immediately on your hands.
2. You need to install it well and then test it, or it will be dangerous.
3. Please operate it according to the instructions.
4. The normal operation of the water heater requires that the power of the power supply must meet the power of the water heater.
Specifications:
Material: ABS Shell
Rated Power: 3500-6000W
Rated Frequency: 50HZ
Heating Power: 2.1KW-6KW
Voltage: 220V
Working Pressure: ≧0.6Mpa
Waterproof Grade: IPX4
Wire Length: About 45cm
Package Included:
1 x Water Heater
1 x Brackets and Screws
Note:
1. It is easy to install, but professional installation is highly recommended.
2. Please check the circuit before installation.
3. Make sure that cold water flow through it, to avoid dry heating before you plug into power in your first time use.
4.The maxmum is 55 Degree ,this is an instant heating type,and the temperature can only be controlled by adjusting the folw of water.
FAQ:
Q: Why does the water heater not start when it is plugged in?
A: 1. Install correctly first. 2. Turn on the water. 3. Turn on the power.
Q: I have installed it as required, why does the water heater not start?
A: The water heater needs to reach the required water pressure to start. Water pipe pressure requirement > 0.04MPa. Then touch the power button for 2 seconds.
Q: What is the maximum temperature of the water heater?
A: The water temperature of the water heater depends on the raw water temperature and water flow. There will be differences in different regions. You won’t necessarily get water temperatures in the described ranges. It is recommended that the original water temperature be >20°C.
Q: How to control the water temperature?
A: By adjusting the water flow. But the final water temperature still depends on the original water temperature.
Q: Why is the electricity at home cut off after turning on the water heater?
A: Please confirm the maximum electrical power that your home circuit can withstand before purchasing. The working power of the water heater is 3500-6000W to avoid circuit overload.
Q: What should I do if the manual is in English and I can’t understand it?
A: Please use translation software to scan the translation.
NOTE
1.Please allow slight deviation for the measurement.
2.Due to the light and screen difference, the item’s color may be slightly different from the pictures, thanks for understanding.